2-channel signal conditioner,Universal usage at different power supplies,Dry contact or NAMUR inputs,Input frequency 1 mHz ... 1 kHz,Current output 0/4 mA ... 20 mA,Relay contact and transistor output,Start-up override,Configurable by PACTware or keypad,Line fault detection (LFD)
Signal type : Digital Input Connection : terminals 23, 24 Rated voltage : 20 ... 90 V DC / 48 ... 253 V AC 50 ... 60 Hz Rated current : approx. 130 mA Power dissipation : 2.2 W / 3.5 VA Power consumption : 2.5 W / 4 VA Programming interface : programming socket Connection side : field side Connection : input I: terminals 1+, 3-
input II: terminals 4+, 6-
input III: terminals 13+, 14- (control input 1)
input IV: terminals 15+, 14- (control input 2) Input I, II : 2-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact Input III, IV : Connection side : control side Connection : output I: terminals 10, 11, 12
output II: terminals 16, 17, 18
output III: terminals 19+, 20-
output IV: terminals 21+, 20-
output V: terminals 7-, 8+ Output I, II : signal, relay Output III and IV : signal , electronic output, passive Output V : analog Programming interface : Input I and II : Output I, II : Output V : Input I, II/other circuits : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Input III, IV/power supply : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Output I, II/other circuits : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Mutual output I, II, III : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Mutual output I, II, IV : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Output III, IV/power supply : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Output III, IV/input III, IV : basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff Output III, IV/V : basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff Output V/power supply : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Interface/power supply : reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff Interface/output III, IV : basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff Display elements : LEDs , display Control elements : Control panel Configuration : via operating buttons
via PACTware Labeling : space for labeling at the front Electromagnetic compatibility : Low voltage : Electromagnetic compatibility : NE 21:2006 Degree of protection : IEC 60529:2001 Input : EN 60947-5-6:2000 Ambient temperature : -20 ... 60 °C (-4 ... 140 °F) Degree of protection : IP20 Connection : screw terminals Mass : 300 g Dimensions : 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001 Supplementary information : Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
P+F供应商
