P+F Rotation Speed Monitor S1SD-1FI-1R_脉冲计数装置和显示屏_传感器_P+F传感器|PEPPERL+FUCHS倍加福传感器-半岛工业|P+F中国

1-channel signal conditioner,24 V DC supply,Input for 2- or 3-wire sensors,Input frequency 10 mHz ... 50 kHz,Relay contact output,Start-up override and restart inhibit,Configurable by DIP switches and software,Connection via screw terminals

Signal type : Digital Input
Connection : Power Bus or terminals 1-, 2+
Rated voltage : 16.8 ... 31.2 V DC
Power dissipation : 0.6 W
Power consumption : 1.1 W
Programming interface : programming socket
Connection side : field side
NAMUR sensor :
Mechanical contact :
SN sensor :
2-wire DC sensor :
S0 sensor :
NPN sensor :
PNP sensor :
AC/DC voltage source :
Function input :
Connection side : control side
Connection : terminals 3, 4:
Output : signal, relay
Contact loading : 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/4 A/cos φ > 0.7; 30 V DC/2 A resistive load
Minimum switch current : 2 mA / 24 V DC
Energized/De-energized delay : ≤ 20 ms / ≤ 20 ms
Mechanical life : 10⁷ switching cycles
Accuracy : max. 0.1 % of the measurement value
Measuring time : ≤ 100 ms
Influence of ambient temperature : < 100 ppm/K of the measured value
Frequency range : 0.01 ... 50000 Hz
Output/power supply : safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits : safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Display elements : LEDs
Control elements : DIP switch
Configuration : via DIP switches
via software
Labeling : space for labeling at the front
Electromagnetic compatibility :
Low voltage :
Degree of protection : IEC 60529:2001
Protection against electrical shock : EN 61010-1:2010
Ambient temperature : -25 ... 70 °C (-13 ... 158 °F)
Storage temperature : -40 ... 85 °C (-40 ... 185 °F)
Damaging gas : designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Degree of protection : IP20
Connection : screw terminals
Core cross section : 0.5 ... 2.5 mm² (20 ... 14 AWG)
Mass : approx. 60 g
Dimensions : 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001
Supplementary information : Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.