100 V AC to 240 V AC wide-range input,Output 48 V DC, 5.4 A, 260 W, 1-phase,Housing width 39 mm,Efficiency up to 95.5 %,Minimal inrush current surge,DC OK relay contact,Suitable for Zone 2/Div. 2 mounting

Efficiency : 93.8 % at 120 V AC
95.5 % at 230 V AC
Power dissipation : 17.2 W at 120 V AC
12.3 W at 230 V AC
Current : 2.32 A at 120 V AC
1.2 A at 230 V AC
2.51 A at 110 V DC
for lower output currents see technical information
Inrush current : 6 A peak at 120 V AC and ambient temperature 40 °C (104 °F)
9 A peak at 230 V AC and ambient temperature 40 °C (104 °F)
Voltage : 100 ... 240 V AC (-10 %/+10 %), 50 ... 60 Hz (±6 %)
110 ... 150 V DC (±20 %)
Capacity factor : 0.99 at 120 V AC
0.98 at 230 V AC
Rated voltage : 48 V DC
Voltage range : 48 ... 56 V DC
factory setting: 48 V
Rated current : 5 A
Current : 6 ... 5.2 A at ambient temperature < 45 °C (113 °F)
5.4 ... 4.6 A at ambient temperature 60 °C (140 °F)
4 ... 3.4 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information
Power : 260 W
Ripple : max. 50 mV pp
Hold-up time : 34 ms at 120 V AC
34 ms at 230 V AC
Overload behavior : continuous current : output voltage > 26 V DC
intermittent current : output voltage < 26 V DC
Short-circuit current : typ. 16 A for up to 12 ms, load impedance < 90 mΩ
Voltage limitation : typ. 58.5 V DC
max. 60 V DC
Connection : terminals 13, 14
Output type : relay contact DC OK
- contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loading : max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC
Input/Output : SELV/PELV
Display elements : LED green: status DC OK
- LED lights up if the output voltage is > 90 % of the adjusted output voltage
Control elements : potentiometer
Configuration : setting of the output voltage via potentiometer
Electromagnetic compatibility :
Low voltage :
RoHS :
Degree of protection : EN 60529
Shock resistance : EN 60068-2-27
Vibration resistance : EN 60068-2-6
Ambient temperature : -25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature : -40 ... 85 °C (-40 ... 185 °F)
Relative humidity : 5 ... 95 %, noncondensing
Shock resistance : 20 g , 11 ms or 30 g , 6 ms
Vibration resistance : 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Housing material : aluminum alloy , galvanized steel
Degree of protection : IP20
Connection :
Mass : approx. 600 g
Dimensions : 39 x 124 x 117 mm (W x H x D) , without DIN mounting rail
Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001
ATEX approval :
Directive conformity :
UL approval : E350173 , E223176
IECEx approval :
Supplementary information : Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

  • 最小起订量 : 1