100 V AC to 240 V AC wide-range input,Output 24 V DC， 5 A， 120 W， 1-phase,Housing width 32 mm,Efficiency up to 94.3 %,Minimal inrush current surge,DC OK relay contact,Suitable for Zone 2/Div. 2 mounting
Efficiency : 93.6 % at 120 V AC
94.3 % at 230 V AC Power dissipation : 8.2 W at 120 V AC
7.3 W at 230 V AC Voltage range : 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %)
110 ... 150 V DC (±20 %) Current : 1.09 A at 120 V AC
0.6 A at 230 V AC
1.21 A at 110 V DC
for lower output currents see technical information Inrush current : 5 A peak at 120 V AC and ambient temperature 40 °C (104 °F)
6 A peak at 230 V AC and ambient temperature 40 °C (104 °F)
or
ambient temperature 25 °C (77 °F) Capacity factor : 0.98 at 120 V AC
0.91 at 230 V AC Rated voltage : 24 V DC Voltage range : 24 ... 28 V DC
factory setting: 24.1 V Rated current : 5 A Current : 6 ... 5.1 A at ambient temperature < 45 °C (113 °F)
5 ... 4.3 A at ambient temperature 60 °C (140 °F)
3.8 ... 3.2 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information Power : 120 W Ripple : max. 50 mV pp Hold-up time : 35 ms at 120 V AC
35 ms at 230 V AC Overload behavior : continuous current at output voltage > 13 V DC
Hiccup behaviour at output voltage < 13 V DC Short-circuit current : typ. 15 A for 12 ms or 3 A rms continuous current Voltage limitation : typ. 30.5 V DC
max. 32 V DC Connection : terminals 13, 14 Output type : relay contact DC OK
- contact is closed if the output voltage is > 90 % of the adjusted output voltage Contact loading : max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC Input/Output : SELV/PELV Display elements : LED green: status DC OK
- LED lights up if the output voltage is > 90 % of the adjusted output voltage Control elements : potentiometer Configuration : setting of the output voltage via potentiometer Electromagnetic compatibility : Low voltage : RoHS : Degree of protection : EN 60529 Shock resistance : EN 60068-2-27 Vibration resistance : EN 60068-2-6 Ambient temperature : -25 ... 70 °C (-13 ... 158 °F) , see technical information Storage temperature : -40 ... 85 °C (-40 ... 185 °F) Relative humidity : 5 ... 95 %, noncondensing Shock resistance : 20 g , 11 ms or 30 g , 6 ms Vibration resistance : 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g Housing material : aluminum alloy , galvanized steel Degree of protection : IP20 Connection : Mass : approx. 440 g Dimensions : 32 x 124 x 102 mm (W x H x D) , without DIN mounting rail Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001 ATEX approval : Directive conformity : UL approval : E350173 , E223176 IECEx approval : Supplementary information : Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
P+F供应商
