100 V AC to 240 V AC wide-range input,Output 24 V DC， 20 A， 480 W， 1-phase,Housing width 48 mm,Efficiency up to 95.6 %,Minimal inrush current surge,DC OK relay contact,Current sharing for parallel use,Suitable for Zone 2/Div. 2 mounting
Efficiency : 94.2 % at 120 V AC
95.6 % at 230 V AC Power dissipation : 29.6 W at 120 V AC
22.1 W at 230 V AC Current : 4.26 A at 120 V AC
2.23 A at 230 V AC
4.64 A at 110 V DC
for lower output currents see technical information Inrush current : 10 A peak at 120 V AC, temperature independent
4.5 A peak at 230 V AC, temperature independent Voltage : 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %)
110 ... 150 V DC (±20 %) Capacity factor : 0.99 at 120 V AC
0.98 at 230 V AC Rated voltage : 24 V DC Voltage range : 24 ... 28 V DC
factory setting: 24.1 V Rated current : 20 A Current : 24 ... 20.6 A at ambient temperature < 45 °C (113 °F)
20 ... 17.1 A at ambient temperature 60 °C (140 °F)
15 ... 13 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information Power : 480 W Ripple : max. 50 mV pp Hold-up time : 32 ms at 120 V AC
32 ms at 230 V AC Overload behavior : continuous current : output voltage > 13 V DC
intermittent current : output voltage < 13 V DC Short-circuit current : typ. 29 A intermitted current peak value for typ. 2 s Voltage limitation : typ. 30.5 V DC
max. 32 V DC Connection : terminals 13, 14 Output type : relay contact DC OK
- contact is closed if the output voltage is > 90 % of the adjusted output voltage Contact loading : max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC Input/Output : SELV/PELV Display elements : LED green: status DC OK
- LED lights up if the output voltage is > 90 % of the adjusted output voltage Control elements : potentiometer , plug-in jumper Configuration : setting of the output voltage via potentiometer
setting of the operating mode
- plug-in jumper plugged in: parallel use operating mode
- plug-in jumper not plugged in: single use operating mode Electromagnetic compatibility : Low voltage : RoHS : Degree of protection : EN 60529 Shock resistance : EN 60068-2-27 Vibration resistance : EN 60068-2-6 Ambient temperature : -25 ... 70 °C (-13 ... 158 °F) , see technical information Storage temperature : -40 ... 85 °C (-40 ... 185 °F) Relative humidity : 5 ... 95 %, noncondensing Shock resistance : 20 g , 11 ms or 30 g , 6 ms Vibration resistance : 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g Housing material : aluminum alloy , galvanized steel Degree of protection : IP20 Connection : Mass : approx. 830 g Dimensions : 48 x 124 x 127 mm , without plugs and without DIN mounting rail Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001 ATEX approval : Directive conformity : UL approval : E350173 , E223176 IECEx approval : Supplementary information : Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
P+F供应商
