N+1 redundancy provides highest reliability,Diagnostics and fault indication,Modular and hot swappable,Automatic load sharing,Adjustable voltage,Fanless,ATEX, IECEx, and cULus approvals for Div 2/Zone 2

Type : diagnostic bus: RS 485
Input current : max 6.5 A
Inrush current : < 50 A peak for 50 µs
Voltage : 90 ... 250 V AC, 44 ... 66 Hz; 90 ... 300 V DC
Rated voltage : 24 V DC
Voltage : 24 V DC ± 1 %
(22.5 ... 30 V DC adjustable)
Current : 15 A
Ripple : 35 mV rms (< 100 mV pp)
Fault signal : relay
50 V DC @ 0.6A
30 V DC @ 2A
Response time : min. hold-up time: ≥ 25 ms at nominal input voltage and output load
Short-circuit current : max. 20 A
Efficiency : up to 91 %
Input/Output : 4.25 kV DC
Display elements : LED Power, green: power on
LED Fault, red: fault indication
LED Alarm, red: module shut-down
Electromagnetic compatibility : Refer to DoC for all directives and standards met.
Galvanic isolation : IEC 61131-2
Electromagnetic compatibility : NE 21:2006
Degree of protection : EN 60529
Shock resistance : EN 60068-2-27
Vibration resistance : EN 60068-2-6
Ambient temperature : -25 ... 45 °C (-13 ... 113 °F) , derated: 0,4 A/°C, (from 45 ... 70 °C (113 ... 158 °F))
Storage temperature : -40 ... 85 °C (-40 ... 185 °F)
Relative humidity : < 95 % , noncondensing
Shock resistance : 15 g , 11 ms
Vibration resistance : 1 g , 58 ... 150 Hz
Housing material : Powder Coated, 1010 Cold Rolled Steel
Degree of protection : IP20
Mass : approx. 1.8 kg ( 4.125 lbs )
Dimensions : 134 x 62 x 268 mm (5.3 x 2.5 x 10.6 inch)
Certificate : DEMKO 12 ATEX 1103387X
Directive conformity :
UL approval : cULus Listed
E230669
E350173
IECEx approval : IECEx UL 13.0082X
Ex ec nC IIC T4 Gc
Supplementary information : Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

  • 最小起订量 : 1